![]() ![]() Frequency still ranges within 800 MHz and 4.60 GHz.Įxample output of cpufreq-info is: analyzing CPU 11:ĬPUs which run at the same hardware frequency: 11ĬPUs which need to have their frequency coordinated by software: 11Īvailable cpufreq governors: performance, powersaveĬurrent policy: frequency should be within 800 MHz and 4.60 GHz. ![]() Setting sudo cpupower frequency-set -min 4500HzĪs suggested here does not work. The CPU is Intel(R) Core(TM) i7-8700, with the hardware limits 800 MHz - 4.60 GHz. It'll also stay at a load if you've done anything like mess with the OC Genie/automatic overclock, changed vcore in bios, tampered with bios settings on a multitude of ways like disable speed step or c-states etc.I want to set higher CPU frequency on Ubuntu 20.04 based system (KDE neon) with 5.4.0-58-generic kernel. Moving the mouse is a load, so the cpu will not idle if you keep moving the mouse to keep the Screensaver disabled or the monitor active. OC will change that, as will locking the cores at max boost of 4.9GHz, both of which drastically increase power usage, and therefore heat output. For the 9700k, that's 1 core at 4.9GHz, 2 cores at 4.8GHz, 3-4 cores at 4.7GHz and 5-8 cores at 4.6GHz. It's usually pretty pathetic.Īt loads over 30% (which is basically anything you start up) the cpu goes to best performance mode and will turbo/boost according to temps and power limits. Idle, base, boost.Īt idle, the cpu backs off on core speeds and voltage use, so temps are set according to ambient case temps and efficiency of cooler.Īt minimal loads, under 30%, you get base speeds, which is the factory set speed to determine TDP. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |